Krell S-300i 2008 - Silver

Krell S-300i for sale. $1000 or best offer. Here's your chance to get a real bargain. It looks great and sounds great. Includes remote and power cable. There are about a zillion reviews online, check them out!

As this is a used unit I cannot offer a warranty other than to say it's working now and will be packed very well and will arrive in solid working condition. Sorry no returns unless it arrives in other than stated condition. If you have any questions please ask before buying.

Here are the specs I found online:

Inputs 1 pr. balanced via XLR connectors 3 pr. single-ended via RCA connectors 1 dedicated iPod input via 30-pin connector Outputs 1 pr. preamp outputs via RCA connectors 1 pr. speaker outputs via gold-plated binding posts Control inputs 1 RS-232 input via 9-pin D-subminiature connector 1 remote IR detector input via 3-conductor 3.5 mm connector 1 12 VDC trigger input via 2-conductor 3.5 mm connector Control output 1 programmable 12 VDC trigger output (30 mA maximum current) via 2-conductor 3.5 mm connector Input impedance Balanced: 95 kΩ Single-ended: 47.5 kΩ Frequency response 20 Hz to 20 kHz +0, -0.14 dB <2 Hz to 110 kHz +0, -3 dB Signal-to-noise ratio >84 dB, wideband, unweighted, at maximum gain, referred to full power output >93 dB, "A"-weighted Gain 32.5 dB Input sensitivity Single-ended or balanced: 800 mV RMS Total harmonic distortion <0.035% at 1 kHz, at 150 W, 8 Ω load <0.26% at 20 kHz, at 150 W, 8 Ω load Output power 150 W RMS per channel at 8 Ω 300 W RMS per channel at 4 Ω Output voltage 99 V peak to peak 35 V RMS Output current 15 A peak Slew rate 50 V/S Output impedance <0.080 Ω at 20 Hz <0.11 Ω, 20 Hz to 20 kHz Damping factor >100 at 20 Hz, referred to 8 Ω >75, 20 Hz to 20 kHz, referred to 8 Ω Power consumption Standby: 40 W Idle: 60 W Maximum: 1000 W Heat output Standby: 140 BTU/hr Idle: 210 BTU/hr Maximum: 1600 BTU/hr Specifications for preamp only: Gain 6.3 dB (single-ended) Volume control Current-mode, 12-bit, discrete R-2R ladder Input overload Balanced: 12 V RMS Single-ended: 6 V RMS Output overload 8 V RMS (single-ended) Frequency response 20 Hz to 20 kHz +0, -0.05 dB <2 Hz to 1.0 MHz +0, -3 dB Total harmonic distortion <0.009%, 20 Hz to 20 kHz, at 2 V RMS Signal-to-noise ratio >85 dB, wideband, unweighted, at maximum gain, referred to 2 V RMS >94 dB, "A"-weighted Dimensions 17.26 in W x 4.09 in H x 17.70 in D 438 mm W x 104 mm H x 450 mm D Weight Unit only: 42 lb [19.0 kg] As shipped: 51 lb [23.1 kg]