"dpFX Pedals" builds handmade and custom effects (dpeffects.com) . All products are serial numbered
LOOP MAESTRO 42 is a multifunctional blender / router with four (4) inputs, two (2) independent outputs (M & H), plus a send/return pair (Looper to/from) for looper connection. Each input has its own volume knob and so do the outputs M & H.
With each one of the four footswitches you can control how the input signals are routed and choose which input you're going to send to the looper or directly to the output. The looper's output signal is mixed with the inputs you choose
LED ON: the respective input is routed to the looper
LED OFF: the input is routed directly to the ouputs M & H.
In every case the output of your looper (connected to jack: “from Looper”) is mixed with the inputs that you choose.
-- Check the flow-chart in the listed photos, it explains how the pedal works in detail. --
- Required power supply: 9-18Volt DC [Exceeding the recommended voltage could damage the circuit.]
- Polarity: Negative tip
- Current draw: 25mA @ 9V
- Input impedance: 1MΩ | LP-in (from looper): 10MΩ
- Output impedance: 100Ω
Shipping method: via Registered Mail (tracking number provided). If you want a faster shipping method please message me before ordering so that I can give you new shipping rates.