This piece of gear has sold
View similar gear from other sellers on Reverb
Watch this gear and we'll notify you if it becomes available again.
"dpFX pedals" build handmade, hand-painted pedals and custom effects. All products are serial numbered.--
This is the Parallel Stereo Pedal Mixer -- Also suitable for line level signals.
Description:
The dpFX Stereo Pedal Mixer (parallel) is a stereo mixer designed for stereo pedal effects & pedalboards. It can be used as a stereo summing box that can take up to 3 stereo signals and combine them into a single stereo output.
It features high-impedance TRS inputs (buffered with JFET op amps) that can be driven by instruments (guitar, bass etc) or line level signals as well. It makes use of low distortion, low noise op amps and each input has a volume knob that goes from mute, up to +6dB gain.
A master-volume knob is available in order to adjust the volume of the TRS output whose impedance is very low ensuring your tone is preserved intact.
The output and all inputs are stereo, suitable for TRS Jacks (6.35mm) but the mixer can also be used in mono-mode simply by pluging mono-jacks in the all inputs & the output.You can also mix stereo and mono inputs as long as you use a stereo output. Just make sure that for the mono signal you use a TS 1/4" to TRS 1/4" cable that ties the Tip of the TS into both the Tip and Ring of the TRS in order to feed the mono signal in both L & R channels
NOTE: if you use standard TS cable for the mono signal it will only appear on the L-left channel of the stereo output).
It works with standard pedal power supplies. Voltage range: 9-18 V. Using voltage higher than 9V will give you more headroom (18V max)The mixer is always on when power is connected (external LED is lit when ON)
Possible uses:
- Run Stereo Effects in parallel.
- Mix multiple instruments.
- Combine parallel effects chains
- Send three stereo channels into one output
| Condition | |
| Brand | |
| Model |
|
| Finish |
|
| Year |
|
| Made In |
|
