dpFX Pedals - 2-way, isolated, buffered Splitter (mini enclosure)

"dpFX pedals" build handmade, hand-painted pedals and custom effects (dpeffects.com). All products are serial numbered.

This signal splitter has 2 buffered outputs and is suitable both for bass and guitar or any other instrument with similar pickups.
The first output is isolated using an audio transformer in case you want to avoid ground loops when sending the output into different amps and it is also equipped with a Phase-Reverse switch. The isolated output can also be connected to a balanced input.

The splitter gives you the ability to split the signal of your instrument without degrading your signal's clarity or tone. Each one of the outputs is equal to the input.

Suitable for both bass and guitar or any other instruments with similar signal-levels (it can also handle lower line level signals)

• Send your signal into two pedal-boards, and a recording device (usually through a DI). While you play and hear your actual sound, you can record your clean signal at the same time. (in case you need it e.g. for re-amping)
• Send your instrument's signal to multiple amps simultaneously. A separate pedal chain can be connected to each output.
• It also serves as a buffer.
• Use as many of the outputs you desire, just leave the unused outputs unconnected.
• Enclosure dimensions: [ inches: 3.65 x 1.52 x 1.22 ],   [ mm: 93 x 40 x 32 ]
• Weight: ~130gr.
• Voltage Required: DC 9-18 Volts (higher voltage gives you more headroom)  DO NOT EXCEED 18V!
• Max Current draw: 6mA @ 9V | 9mA @ 18V
• Input impedance: 3MΩ
• Output impedance: ~700Ω
• Equipped with indicative LEDs to show you when the pedal is powered.
  

Shipping method: via Registered Mail (tracking number provided). If you wish a faster shipping method please message me before ordering so that I can give you new shipping rates.